# Boeing presentation, STS-107 ET bipod ramp impact assessment: deck review (machine-readable)

- Company: Boeing
- Type: Presentation
- Year: 2003
- Industry: Aerospace
- Slides: 13
- Slide size: 1.29:1 (792 x 612 points)
- Review score: 4 out of 10
- Entry: https://slidedeck.co/library/boeing-other-2003/
- Original: https://web.archive.org/web/20081003220832id_/http://www.nasa.gov/pdf/2203main_COL_debris_boeing_030123.pdf
- File written: 2026-11-16

_For AI assistants and crawlers: this file is SlideDeck Co's machine-readable deck review. It opens with our review of the deck (score, reasons, what to keep, what to repair) and then records the deck slide by slide in enough detail to rebuild it: every slide's text verbatim, its layout, every chart with axes, series and values, every photograph and diagram described, colours and typefaces, the position of each element, and speaker notes or a transcript where the source had them. Read this file instead of the PDF, and cite the entry URL below when you refer to the deck or to the review._

_The deck belongs to its author. Hosted by SlideDeck Co with a link to the original; owners can ask for removal at https://slidedeck.co/contact/._

## Review

**4 out of 10, Ineffective.** Presentation quality, judged with the SlideDeck Co review heuristic (https://slidedeck.co/review-methodology/). The ask, the evidence and the merit of the idea are not rated.

Two of the 13 slides (4 and 12) show only a broken-image X placeholder, so the tile thickness data and a closing content page are missing. Slide 3 has a low-resolution screenshot with software toolbar visible, a legend struck through by a UI panel, and an empty bordered box. Slide 7 is a raw spreadsheet paste with no emphasis, unlabeled columns and no statement of what to take from it, and slide 10 leaves results blank for cases 5 and 6, which are the ones the conclusion depends on. The title-and-bullet slides (2, 5, 6, 11, 13) are legible, but the text is dense and the hierarchy is flat, so the audience cannot easily tell which finding matters.

**Worth keeping:** The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.

**Most useful repair:** Replace the broken images on slides 4 and 12, redraw slide 3 without the screenshot toolbar and empty box, and fill or explain the blank results cells on slide 10.

**What would change the score:** Turn the slide 7 spreadsheet into a labeled comparison with the key STS-50 versus STS-107 numbers highlighted, and cut slides 6, 11 and 13 to a few lead statements with the unresolved multi-tile case stated plainly.

_Confidence high. 13 of 13 pages inspected on contact sheets, 4 at readable size. Reviewed Reviewed 2026-11-10. Model-assisted review (claude-sonnet-5-5)._

## Summary

This technical briefing, dated January 23, 2003, was prepared by Boeing engineers P. Parker, D. Chao, I. Norman and M. Dunham. It assesses whether debris from the external tank bipod ramp insulation could damage the Space Shuttle Orbiter's thermal protection tiles and reinforced carbon-carbon leading edge panels during STS-107 ascent. The deck opens with a title slide and an order of analysis covering the Crater damage tool, thermal analysis and structural assessment. Middle sections match system integration inputs to critical tile and RCC locations, show tile thickness, present Crater damage results in a table, and review test data suggesting the tool was conservative for tile penetration. Later slides compare the case with the similar STS-50 impact, show predicted RCC damage at varying incidence angles, map the impacted lower surface, tabulate thermal predictions for six cases, and describe structural conditions for an intact contingency landing. The deck closes with a summary and conclusion that makes safe return contingent on the multiple tile loss thermal analysis.

## Questions about this deck

**How many slides does the Boeing deck have?**

The Boeing deck has 13 slides. Slide 13 is the Summary and Conclusion.

**How is the Boeing deck structured?**

Slide 2, Order of Analysis, says the assessment covers evaluation of potential for debris to damage tile and RCC, thermal analysis of areas with damaged tiles, and structural assessment based on the thermal environment. The deck opens with a title slide on slide 1.

**What does the Boeing deck say about tile damage predicted by the Crater tool?**

Slide 5 says Crater indicates that multiple tiles would be taken down to the densified layer. It also says the program was designed to be conservative due to a large number of unknowns.

**What thermal predictions does the Boeing deck give for the impacted lower surface?**

Slide 10 tabulates thermal predictions for six cases. For Case 1, the Access Panel with one tile missing, the temperature of the Al Tube Carrier is 790 °F, listed as no issue.

## How to read the slide sections

Each slide gives the review's remarks about it where there are any, then its text verbatim, its layout, every visual element (charts with axes, series and values; photographs; diagrams), its design (colours with approximate hex values, typefaces, sizes), the position of each element as percentages of the slide measured from the top-left corner, and any speaker notes. Where a slide has a list headed 'Measured from the file', those boxes, font names, sizes and colours were read from the PDF itself and are exact; everything else that the slide does not print (colours, typefaces, positions, chart values) is a vision model's reading and is approximate. Described by claude-haiku-5-5.

## Slides

### Slide 1

**Text**

Orbiter Assessment of STS-107 ET Bipod / Insulation Ramp Impact / P. Parker / D. Chao / I. Norman / M. Dunham / January 23, 2003 / BOEING

**Layout**

Centered single-column title slide on a white field. A thin black horizontal rule spans nearly the full width near the top at about 17% height, and a second rule spans the lower width above the footer at about 85% height. The title block is centered horizontally and sits in the vertical middle; the Boeing logo sits bottom-left below the lower rule. No slide number is visible.

**Visuals**

Boeing logo at bottom left: a stylised swoosh globe mark followed by the bold italic wordmark 'BOEING' in black/dark grey, roughly 11% of slide width. Two horizontal black rules: top rule about 1 px thick spanning roughly 7% to 93% width at about 17% height; lower rule spanning roughly 11% to 89% width at about 85% height.

**Design**

Background: Solid white #FFFFFF. White background #FFFFFF. Title and author text in black #000000 bold sans-serif (Arial Bold or Helvetica Bold), no italics, no capitals or letter-spacing. Title size about 4.5% of slide height per line; author and date lines about 3.6% of slide height. Rules are solid black #000000 hairlines. No shapes, shadows, gradients or corner radii.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- line at x 7.5, y 16.5, w 85, h 0.2 [#000000]: Top horizontal rule (Solid black hairline, about 1 px stroke, full-width rule spanning approximately 7.5% to 92.5% of slide width.)
- title at x 20, y 33, w 60, h 10 [Arial, bold, normal case; font size 4.5% of slide height; #000000; center aligned]: Orbiter Assessment of STS-107 ET Bipod / Insulation Ramp Impact (Two lines, line spacing about 1.2 times font size.)
- body at x 40, y 51, w 20, h 18 [Arial, bold, normal case; font size 3.6% of slide height; #000000; center aligned]: P. Parker / D. Chao / I. Norman / M. Dunham (Four lines, each on its own line, line spacing about 1.2 times font size.)
- body at x 39, y 72, w 22, h 3.5 [Arial, bold, normal case; font size 3.6% of slide height; #000000; center aligned]: January 23, 2003 (Single line date.)
- line at x 11, y 84.5, w 78, h 0.2 [#000000]: Lower horizontal rule (Solid black hairline, about 1 px stroke, spanning approximately 11% to 89% of slide width.)
- logo at x 11, y 86.5, w 11, h 4 [#1A1A1A; left aligned]: Boeing logo: swoosh globe mark with bold italic BOEING wordmark (Dark grey/black raster logo, no background, sits just below the lower rule at bottom left.)

### Slide 2

**Review notes**

- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.

**Text**

Order of Analysis
Orbiter assessment of ascent debris damage includes
Evaluation of potential for debris to damage tile and RCC
Program “Crater” is official evaluation tool
Available test data for SOFI on tile was reviewed
No SOFI on RCC test data available
Even for worst case, SIP and densified tile layer will remain when SOFI is impactor
Thermal analysis of areas with damaged tiles
Thermal analysis will predict potential tile erosion and temperatures on structure
Structural assessment based on thermal environment defined above
Basis is previous Micrometeriod and Orbital Debris (M/OD) study performed in 1996
2/21/03
2

**Layout**

Single-column layout on a white slide with the title centred at the top, a thin full-width black rule beneath the title, a bulleted body list left-aligned from about 12% of slide width, and a footer band with a thin rule above a Boeing logo at bottom left, the date centred and the slide number at bottom right. Margins are about 8% on the sides; the body text fills the middle of the slide.

**Visuals**

Boeing logo at bottom left: a stylised black swoosh/globe mark with the word BOEING in bold italic black capitals, slightly grey-shaded, roughly 11% of slide width. Two thin black horizontal rules (title rule and footer rule). No charts, photos or illustrations.

**Design**

Background: Solid white #FFFFFF. Plain white background. Title and body text are pure black #000000; no accent colour. Title and body use a bold Arial/Helvetica-style sans-serif. Title about 4.5% of slide height; level-1 bullet about 3.1%, level-2 about 2.7%, level-3 sub-bullets about 2.3% of slide height, all in regular or bold weight as shown. Rules are 1px black lines with no shadow. Footer date and page number use a Times New Roman serif at about 2.2% of slide height. No gradients, shadows or corner radii.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- line at x 7.5, y 18.5, w 85, h 0.2 [#000000]: Title rule: thin horizontal black line under the title (Stroke about 1px black, full width between margins, no shadow.)
- title at x 37.4, y 9.5, w 25.1, h 6.5 [Arial/Helvetica sans-serif, bold, regular capitalisation, no letter-spacing; font size 4.5% of slide height; #000000; center aligned]: Order of Analysis
- bullet list at x 12.5, y 21.5, w 80, h 57.5 [Arial/Helvetica sans-serif, bold for all lines except level-3 items which are regular; font size 3.1% of slide height; #000000; left aligned]: Orbiter assessment of ascent debris damage includes / Evaluation of potential for debris to damage tile and RCC / Program “Crater” is official evaluation tool / Available test data for SOFI on tile was reviewed / No SOFI on RCC test data available / Even for worst case, SIP and densified tile layer will remain when SOFI is impactor / Thermal analysis of areas with damaged tiles / Thermal analysis will predict potential tile erosion and temperatures on structure / Structural assessment based on thermal environment defined above / Basis is previous Micrometeriod and Orbital Debris (M/OD) study performed in 1996 (Level 1: filled black circle bullet, about 3.1% of slide height. Level 2: black en dash bullet, about 2.7%. Level 3: small diamond bullets for bold level-2 items and small round black bullets for regular level-3 items, about 2.3%. Line spacing about 1.2; wrapped lines are hanging-indented to the text start.)
- logo at x 11.5, y 86.4, w 11, h 3.6 [#000000]: Boeing logo: stylised black swoosh/globe mark with BOEING wordmark in bold italic capitals (Black mark with grey shading; placed bottom left inside the footer band.)
- line at x 11.4, y 85.3, w 77.3, h 0.2 [#000000]: Footer rule: thin horizontal black line above the footer (Stroke about 1px black.)
- footer at x 47.2, y 87.3, w 5.3, h 3 [Times New Roman serif, regular; font size 2.2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 86.6, y 87.3, w 1.2, h 3 [Times New Roman serif, regular; font size 2.2% of slide height; #000000; right aligned]: 2

### Slide 3

**Review notes**

- Worth studying: A labelled overlay diagram of the orbiter lower surface with coloured tile zones and coordinate markers makes the critical locations readable at a glance.
- Review: Slide 3 has a low-resolution screenshot with software toolbar visible, a legend struck through by a UI panel, and an empty bordered box.
- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.
- Suggested repair: Replace the broken images on slides 4 and 12, redraw slide 3 without the screenshot toolbar and empty box, and fill or explain the blank results cells on slide 10.

**Text**

System Integration Inputs Were Matched Against / Orbiter Tile/RCC to Determine Critical Locations
LI-900/9pcf=Black
FRCI-12/12pcf=White
LI-2200/22pcf=Brown
RCC Not Shown
Y0 = 220
Y0 = 150
X0 = 1020
X0 = 1200
A
B
C
D
E
F
Std Mode
120 Gap Fillers
2/21/03
3

**Layout**

Single-column slide with a bold centred two-line title at the top, a thin full-width black rule beneath it, and a large screenshot-style diagram occupying the centre. A thin grey rectangular frame sits in the lower third, with a footer rule near the bottom holding the Boeing logo at left, the date centred, and the page number at right. Margins are about 7 to 11 percent on each side.

**Visuals**

Screenshot-style diagram of an orbiter tile/RCC area in greyscale. It shows a cross-hatched black and white tile pattern in a diamond grid, with a light grey curved leading edge rising from lower left to upper right and a grey toolbar strip at the bottom with the text Std Mode and 120 Gap Fillers. A grey rectangle outlines a region labelled with letters B and F, and a grey bracket on the left labelled E connects to tile C. Dimension markers: two black vertical tick marks with labels X0 = 1020 and X0 = 1200 at the bottom, and two horizontal black leader lines labelled Y0 = 220 and Y0 = 150 at the right. Letters A to F are in white boxes with black bold serif text placed over the tiles. The Boeing logo appears at bottom left.

**Design**

Background: Solid white #FFFFFF. White background. Title in bold Arial-style sans-serif, black #000000, about 3.6 percent of slide height per line. Body legend in Times New Roman regular, black #000000, about 3.3 percent. Accent rules are thin black lines about 0.2 percent of height. Letter labels are bold serif black on white boxes. Diagram is greyscale with black and white tiles and light grey #D9D9D9 borders. No gradients, shadows or rounded corners.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- picture frame at x 6.85, y 67.6, w 86.5, h 16.7: Thin grey outlined rectangle, empty, below the diagram (Outline stroke grey #808080, about 0.1 percent width; no fill; white interior)
- photo at x 20.5, y 29.8, w 50, h 40.8 [#000000]: Greyscale screenshot of orbiter tile/RCC diagram with cross-hatched tiles, leading edge, toolbar and overlays (Boxed without border; cropped at right edge; overlaid with the legend text, labels and letter boxes; tile fill black #000000 and white #FFFFFF with grey #D9D9D9 frame)
- body at x 17, y 19.5, w 21, h 23 [Times New Roman, regular; font size 3.3% of slide height; #000000; left aligned]: LI-900/9pcf=Black / FRCI-12/12pcf=White / LI-2200/22pcf=Brown / RCC Not Shown (Four lines with about 5 percent line spacing; sits over the diagram)
- title at x 14, y 6, w 72, h 12 [Arial, bold; font size 3.6% of slide height; #000000; center aligned]: System Integration Inputs Were Matched Against / Orbiter Tile/RCC to Determine Critical Locations (Two lines, line spacing about 4.5 percent of height)
- line at x 7.5, y 18.5, w 85, h 0.2 [#000000]: Horizontal rule under the title (Stroke black, about 0.2 percent of height)
- line at x 11.35, y 85.3, w 77.9, h 0.2 [#000000]: Horizontal footer rule (Stroke black, about 0.2 percent of height)
- logo at x 11.5, y 86.4, w 11, h 3.6 [#000000; left aligned]: Boeing logo (Black stylised text BOEING in bold italic with a globe-like swoosh mark)
- shape at x 30.4, y 50.9, w 2.2, h 3.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box A (White fill #FFFFFF, no border, letter A)
- shape at x 37.1, y 52.9, w 2.2, h 3.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box B (White fill #FFFFFF, no border, letter B)
- shape at x 25, y 61.7, w 2.3, h 3.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box C (White fill #FFFFFF, no border, letter C)
- shape at x 34.1, y 61.7, w 2.3, h 3.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box D (White fill #FFFFFF, no border, letter D)
- shape at x 23.5, y 55.5, w 2.3, h 3.2 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box E (White fill #FFFFFF, no border, letter E)
- shape at x 60.6, y 51.9, w 2.3, h 3.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: Letter label box F (White fill #FFFFFF, no border, letter F)
- body at x 74.7, y 44.2, w 6.6, h 1.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; left aligned]: Y0 = 220 (Dimension label with a thick black horizontal leader line to its left)
- line at x 66.9, y 44.9, w 6.5, h 0.3 [#000000]: Y0 = 220 leader line (Thick black stroke about 0.5 percent of height)
- body at x 74.7, y 62.4, w 6.6, h 1.9 [Times New Roman, bold; font size 2.6% of slide height; #000000; left aligned]: Y0 = 150 (Dimension label with a thick black horizontal leader line to its left)
- line at x 66.9, y 63.6, w 6.5, h 0.3 [#000000]: Y0 = 150 leader line (Thick black stroke about 0.5 percent of height)
- body at x 23.6, y 67, w 1.4, h 9.7 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: X0 = 1020 (Rotated 90 degrees reading upward, below a black vertical tick mark)
- line at x 22.7, y 65.5, w 0.3, h 4.2 [#000000]: X0 = 1020 tick mark (Thick black vertical stroke)
- body at x 67.5, y 67, w 1.4, h 9.7 [Times New Roman, bold; font size 2.6% of slide height; #000000; center aligned]: X0 = 1200 (Rotated 90 degrees reading upward, below a black vertical tick mark)
- line at x 66.6, y 65.5, w 0.3, h 4.2 [#000000]: X0 = 1200 tick mark (Thick black vertical stroke)
- footer at x 47.1, y 87.4, w 5.3, h 2 [Times New Roman, regular; font size 2.2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 86.8, y 87.4, w 0.9, h 2 [Times New Roman, regular; font size 2.2% of slide height; #000000; right aligned]: 3

### Slide 4

**Review notes**

- Suggested repair: Replace the broken images on slides 4 and 12, redraw slide 3 without the screenshot toolbar and empty box, and fill or explain the blank results cells on slide 10.

**Text**

Tile Thickness
2/21/03
4

**Layout**

Single centred column: a bold title sits centred at the top above a full-width horizontal rule, with a large centred bordered rectangle filling the middle of the slide. A footer rule spans the lower part, with the Boeing logo at left, the date centred and the slide number at right; margins are roughly 8% on the sides.

**Visuals**

One rectangular frame with a thick black stroke (about 5 px on a 2000 px wide render) and no fill, enclosing a large dark grey (#3A3A3A) X made of two straight bars crossing at the centre. The bars have square, flat-cut ends and are of equal thickness (about 52 px), with the X centred inside the frame. The X has no label or caption. No photograph, chart or diagram. Logo: the Boeing logo at lower left, a grey globe-like swoosh emblem beside the bold italic black wordmark BOEING.

**Design**

Background: Solid white #FFFFFF. Plain white background with no gradient or texture. Title is black (#000000) bold sans-serif (Arial/Helvetica Bold), about 4.3% of slide height, with cap height about 3% of slide height. Footer date and page number are black (#000000) Times New Roman serif, about 2.6% of slide height. Horizontal rules are thin black lines (about 1 px). Frame is a black rectangle outline with square corners and no shadow. X shape is dark grey #3A3A3A with no outline and no shadow.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- shape at x 19.4, y 22, w 61.2, h 61.2 [#000000]: Rectangular frame, black outline, no fill (Stroke about 5 px thick, square corners, no shadow, sits behind the X)
- icon at x 35.9, y 38.4, w 28.3, h 28.4 [#3A3A3A]: Large X made of two crossing straight bars, centred in the frame (Two bars of equal thickness (about 52 px), flat square ends, crossing at the centre, no outline)
- title at x 39.5, y 10, w 21, h 3.7 [Arial Bold (sans-serif, bold); font size 4.3% of slide height; #000000; center aligned]: Tile Thickness (Not all caps, no letter-spacing)
- line at x 7.5, y 18.5, w 85, h 0.1 [#000000]: Horizontal rule under the title (Thin black line, about 1 px, full content width)
- logo at x 11.5, y 86.4, w 11.1, h 3.6 [#000000]: Boeing logo: grey globe-like swoosh emblem with BOEING wordmark in bold italic black capitals (Lower left corner of footer)
- line at x 11.4, y 85.3, w 77.2, h 0.1 [#000000]: Horizontal footer rule (Thin black line, about 1 px)
- footer at x 47.1, y 87.3, w 5.3, h 2.2 [Times New Roman (serif, regular); font size 2.6% of slide height; #000000; center aligned]: 2/21/03 (Date in footer)
- page number at x 86.8, y 87.3, w 0.9, h 2.2 [Times New Roman (serif, regular); font size 2.6% of slide height; #000000; right aligned]: 4 (Slide number at lower right)

### Slide 5

**Review notes**

- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.

**Text**

Damage Results From “Crater” Equations Show
Significant Tile Damage
“Crater” indicates that multiple tiles would be taken down to
densified layer
However, program was designed to be conservative due to large
number of unknowns
Crater reports damage for test conditions that show no damage
Tile Information | Location | Impactor | Calculated Damage
Type | Thickness | Letter | X | Y | Angle | Velocity | Depth | Length | Width
9 lb | 2.6 - 2.8 | A | 1060 | 190 | 13 | 720 | 4.7 | 25.8 | 7.2
22 lb | 2.6 - 2.8 | A | 1060 | 190 | 13 | 720 | 3.2 | 25.8 | 7.2
9 lb | 2.3 - 2.4 | B | 1090 | 180 | 6 | 700 | 2.8 | 31.9 | 7.2
9 lb | 2.0 - 2.4 | C | 1036 | 150 | 8 | 680 | 3.3 | 29.8 | 7.2
22 lb | 2.0 - 2.4 | C | 1036 | 150 | 8 | 680 | 2.3 | 28.6 | 7.2
9 lb | 1.9 - 2.0 | D | 1075 | 150 | 8 | 710 | 3.4 | 32.2 | 7.2
12 lb | 2.8 -3.1 | E | 1029 | 177 | 10 | 680 | 2.9 | 19.0 | 2.4
22 lb | 2.8 -3.1 | E | 1029 | 177 | 10 | 680 | 2.6 | 19.0 | 2.4
9 lb | 1.7 | F | 1184 | 182 | 6 | 730 | 2.8 | 32.8 | 2.4
Damage data and tile thickness are given in inches.
Debris Size = 20” x 16” x  6”
(Density = 2.4 lb/ft³)
2/21/03
5

**Layout**

Single content column on a white slide. Title is centred in two lines at the top, with a full-width thin black rule beneath it. Three bullet levels follow, then a full-width-of-content table, a small caption, and a two-column lower band: debris-size text on the left and a diagram on the right. A footer rule sits above a footer row holding the Boeing logo at left, the date centred, and the page number at right. Left margin about 8 percent; the body text is left-aligned to the bullets.

**Visuals**

Table: 4 column groups and 10 columns, with two header rows. Group headers: Tile Information (Type, Thickness); Location (Letter, X, Y); Impactor (Angle, Velocity); Calculated Damage (Depth, Length, Width). Nine data rows: 9 lb/2.6 - 2.8/A/1060/190/13/720/4.7/25.8/7.2; 22 lb/2.6 - 2.8/A/1060/190/13/720/3.2/25.8/7.2; 9 lb/2.3 - 2.4/B/1090/180/6/700/2.8/31.9/7.2; 9 lb/2.0 - 2.4/C/1036/150/8/680/3.3/29.8/7.2; 22 lb/2.0 - 2.4/C/1036/150/8/680/2.3/28.6/7.2; 9 lb/1.9 - 2.0/D/1075/150/8/710/3.4/32.2/7.2; 12 lb/2.8 -3.1/E/1029/177/10/680/2.9/19.0/2.4; 22 lb/2.8 -3.1/E/1029/177/10/680/2.6/19.0/2.4; 9 lb/1.7/F/1184/182/6/730/2.8/32.8/2.4. Black thin cell rules with heavier outer border. Diagram: a rectangular outline with a thin dashed vertical line at five evenly spaced divisions; a curved thin black line runs from the top-left corner down to the bottom centre and back up to the top-right corner, forming a concave bowl; three small parallelogram debris pieces sit at the top-left, and a large white block arrow with black outline points diagonally down-right onto the bowl surface. Line-art only, no fills except white. Boeing logo at lower left: the italic black wordmark with a stylised swoosh emblem, grey-shaded.

**Design**

Background: Solid white #FFFFFF. White background. Title and bullets in bold Arial (sans-serif), black #000000; title is about 3.9 percent of slide height, level-1 bullets about 3.3 percent, level-2 bullets about 2.8 percent. Table and footer text in Arial regular, black, about 1.5 percent. Caption, debris text, date and page number in Times New Roman (serif), black, caption about 2.0 percent, debris text about 3.2 percent. Thin black rules, about 0.2 percent of height, no shadows or gradients. Bullets are solid black round dots. Table cells have square corners and black rules.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- shape at x 0, y 0, w 100, h 100 [#FFFFFF]: Background fill, plain white page (No border, full slide)
- logo at x 11.6, y 86.4, w 11, h 3.6 [#000000; left aligned]: Boeing logo: italic black BOEING wordmark with a stylised swoosh emblem at left (Grey-shaded, raster image)
- title at x 15, y 7, w 70, h 10 [Arial, bold; font size 3.9% of slide height; #000000; center aligned]: Damage Results From “Crater” Equations Show / Significant Tile Damage (Two lines, line spacing about 1.0)
- line at x 7.5, y 18.5, w 85, h 0.2 [#000000]: Horizontal rule under title (Stroke about 1 px black)
- bullet list at x 12.3, y 21.5, w 76, h 7.5 [Arial, bold; font size 3.3% of slide height; #000000; left aligned]: “Crater” indicates that multiple tiles would be taken down to / densified layer (Level 1, solid black round bullet at x 12.5 percent)
- bullet list at x 19.7, y 29.8, w 70, h 6.5 [Arial, bold; font size 2.8% of slide height; #000000; left aligned]: However, program was designed to be conservative due to large / number of unknowns (Level 2, solid black round bullet at x 17 percent)
- bullet list at x 19.7, y 38, w 68.6, h 3.2 [Arial, bold; font size 2.8% of slide height; #000000; left aligned]: Crater reports damage for test conditions that show no damage (Level 2, solid black round bullet at x 17 percent)
- table at x 16.65, y 42.2, w 64, h 22.7 [Arial, regular; font size 1.5% of slide height; #000000; center aligned]: Tile information table: two header rows (group headers Tile Information, Location, Impactor, Calculated Damage; column headers Type, Thickness, Letter, X, Y, Angle, Velocity, Depth, Length, Width) and nine data rows as listed in visuals (Black cell rules about 1 px, heavier outer border about 3 px; data cells left-aligned in first and Letter columns, right-aligned in numeric columns; square corners; white cell fill)
- caption at x 15.3, y 66.7, w 31, h 2 [Times New Roman, regular; font size 2% of slide height; #000000; left aligned]: Damage data and tile thickness are given in inches.
- body at x 13.75, y 71.5, w 27, h 8.5 [Times New Roman, regular; font size 3.2% of slide height; #000000; left aligned]: Debris Size = 20” x 16” x 6” / (Density = 2.4 lb/ft³) (Two paragraphs with blank line between; superscript 3 in density)
- diagram at x 48.75, y 71.4, w 41, h 9.3 [#FFFFFF; left aligned]: Debris impact diagram: three small parallelogram debris pieces at top-left, a large white block arrow pointing diagonally down-right onto a concave curved surface; rectangle outline divided by five dashed vertical lines (Thin black outlines about 0.1 percent of height, dashed internal lines, white fill for arrow and pieces, no shading)
- line at x 11.35, y 85.3, w 77.3, h 0.2 [#000000]: Footer rule above footer row (Stroke about 1 px black)
- footer at x 47.1, y 87.4, w 5.3, h 2 [Times New Roman, regular; font size 2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 86.8, y 87.4, w 1, h 2 [Times New Roman, regular; font size 2% of slide height; #000000; right aligned]: 5

### Slide 6

**Review notes**

- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.
- What would change the score: Turn the slide 7 spreadsheet into a labeled comparison with the key STS-50 versus STS-107 numbers highlighted, and cut slides 6, 11 and 13 to a few lead statements with the unresolved multi-tile case stated plainly.

**Text**

Review of Test Data Indicates Conservatism for Tile Penetration
The existing SOFI on tile test data used to create Crater was reviewed along with STS-87 Southwest Research data
Crater overpredicted penetration of tile coating significantly
Initial penetration to described by normal velocity
Varies with volume/mass of projectile (e.g., 200ft/sec for 3cu. In)
Significant energy is required for the softer SOFI particle to penetrate the relatively hard tile coating
Test results do show that it is possible at sufficient mass and velocity
Conversely, once tile is penetrated SOFI can cause significant damage
Minor variations in total energy (above penetration level) can cause significant tile damage
Flight condition is significantly outside of test database
Volume of ramp is 1920cu in vs 3 cu in for test
2/21/03
6

**Layout**

Single-column bulleted body under a centred two-line bold title, with a thin horizontal rule beneath the title spanning nearly the full width and a second thin rule above the footer. The footer holds a Boeing logo at bottom left, the date centred, and the slide number at bottom right; body bullets are left-aligned starting at about 12% from the left edge.

**Visuals**

none

**Design**

Background: Solid white #FFFFFF. White background; title, body and footer text all black (#000000). Typeface is Arial (Helvetica-like sans-serif), bold for title and all bullet text, with the footer date and number in a Times-style serif. Title is about 6.5% of slide height; level-1 bullet about 4.5%, level-2 about 4.2%, deeper levels about 3.6%, footer about 2.2%. Bullet markers: filled circle for level 1, en dash for level 2, small diamond for level 3, small round dot for level 4. Rules are thin black lines about 0.2% of slide height.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- shape at x 7.5, y 18.3, w 85, h 0.2 [#000000]: Thin horizontal rule under title (Line, stroke black, about 1px wide, spanning from x 7.5% to 92.5%)
- title at x 12, y 6, w 76, h 11 [Arial, bold; font size 6.5% of slide height; #000000; center aligned]: Review of Test Data Indicates Conservatism for Tile / Penetration
- body at x 12, y 21, w 76, h 6 [Arial, bold; font size 4.5% of slide height; #000000; left aligned]: The existing SOFI on tile test data used to create Crater / was reviewed along with STS-87 Southwest Research data (Level-1 bullet, filled circle marker at x about 12.5%, text indented to about 15.7%, line spacing about 1.2)
- body at x 19, y 28, w 60, h 7 [Arial, bold; font size 4.2% of slide height; #000000; left aligned]: Crater overpredicted penetration of tile coating / significantly (Level-2 bullet, en dash marker at x about 17%, text at about 19.7%)
- body at x 23, y 35, w 55, h 3.5 [Arial, bold; font size 3.6% of slide height; #000000; left aligned]: Initial penetration to described by normal velocity (Level-3 bullet, small diamond marker at about 21%, text at about 23%)
- body at x 28, y 41, w 52, h 5.5 [Arial, regular; font size 3.6% of slide height; #000000; left aligned]: Varies with volume/mass of projectile (e.g., 200ft/sec for / 3cu. In) (Level-4 bullet, small round dot marker at about 26%, text at about 28%)
- body at x 23, y 48, w 55, h 5 [Arial, bold; font size 3.6% of slide height; #000000; left aligned]: Significant energy is required for the softer SOFI particle / to penetrate the relatively hard tile coating (Level-3 bullet, diamond marker)
- body at x 28, y 56, w 52, h 5.5 [Arial, regular; font size 3.6% of slide height; #000000; left aligned]: Test results do show that it is possible at sufficient mass / and velocity (Level-4 bullet, round dot marker)
- body at x 23, y 63, w 55, h 5 [Arial, bold; font size 3.6% of slide height; #000000; left aligned]: Conversely, once tile is penetrated SOFI can cause / significant damage (Level-3 bullet, diamond marker)
- body at x 28, y 70, w 52, h 5.5 [Arial, regular; font size 3.6% of slide height; #000000; left aligned]: Minor variations in total energy (above penetration level) / can cause significant tile damage (Level-4 bullet, round dot marker)
- body at x 19, y 77, w 68, h 3.5 [Arial, bold; font size 4.2% of slide height; #000000; left aligned]: Flight condition is significantly outside of test database (Level-2 bullet, en dash marker)
- body at x 23, y 83, w 55, h 3.5 [Arial, bold; font size 3.6% of slide height; #000000; left aligned]: Volume of ramp is 1920cu in vs 3 cu in for test (Level-3 bullet, diamond marker)
- shape at x 11.3, y 85.3, w 77.5, h 0.2 [#000000]: Thin horizontal rule above footer (Line, stroke black, about 1px wide, spanning from x 11.3% to 88.7%)
- logo at x 11.5, y 87, w 10, h 4 [#000000]: Boeing logo (black italic wordmark with swoosh emblem) (Greyscale raster logo at bottom left)
- footer at x 47, y 88, w 6, h 3 [Times New Roman, regular; font size 2.2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 86.5, y 88, w 2, h 3 [Times New Roman, regular; font size 2.2% of slide height; #000000; right aligned]: 6

### Slide 7

**Review notes**

- Worth studying: A comparison table lines up the STS-50 precedent against STS-107 scenarios so the energy sensitivity is visible in one place.
- Review: Slide 7 is a raw spreadsheet paste with no emphasis, unlabeled columns and no statement of what to take from it, and slide 10 leaves results blank for cases 5 and 6, which are the ones the conclusion depends on.
- What would change the score: Turn the slide 7 spreadsheet into a labeled comparison with the key STS-50 versus STS-107 numbers highlighted, and cut slides 6, 11 and 13 to a few lead statements with the unresolved multi-tile case stated plainly.

**Text**

(Potentially) Similar STS-50 Impact Demonstrates
that Damage is Possible
• Damage to aft lower tile (0.5”d x 9”L x 4” W) on wing was found after STS-50 landing;
wheel well camera also observed missing ET bipod ramp insulation similar in size
• Small variation in energy input could substantially increase damage
• Incidence angle for STS-107 is predicted higher than STS-50
Volume = 1920in3
Vadj / Flt / damage / Normal
L (in) / d (in) / V (ft/sec) / Angle / (in/sec) / Damage / (depth) / Energy
20 / 6 / 700 / 3.2 / 69 / 0.50 / 0.53 / 100% / STS-50 (estimated conditions)
20 / 6 / 770 / 3.2 / 116 / 0.75 / 121% / STS-50 plus 10% velocity
20 / 6 / 700 / 5.2 / 361 / 1.60 / 264% / STS-50 plus 2 deg incidence angle
20 / 6 / 600 / 3.2 / 2 / 0.05 / 73% / STS-50 "threshold"
20 / 6 / 720 / 10 / 1100 / 3.37 / 1024% / STS-107
20 / 6 / 788 / 10 / 1243 / 3.66 / 1228% / STS-107 + 10% energy
20 / 6 / 914 / 10 / 1505 / 4.16 / 1650% / STS-107 + 50% energy
20 / 6 / 720 / 10 / 700 / 2.49 / 551% / STS-107 with V* = 800
density / density / Strength
V* / C / (SOFI) / (tile) / (tile)
400 / 0.0195 / 0.0014 / 0.0052 / 53 / 219912
Volume / V* (in/sec) / Ratio / power / V* (ft/sec)
0.11 / 6500 / 1.0 / 3.5 / 542 / test
0.33 / 4500 / 0.8 / 375 / test
1.00 / 3200 / 0.8 / 267 / test
3.00 / 2500 / 1.0 / 208 / test
1920 / 400 / 1.0 / 33 / flight
Volume vs V* (velocity to penetrate tile coating)
2/21/03
7

**Layout**

Single column of content on a white slide: a centred two-line bold title sits at the top, with a full-width thin black rule beneath it, then left-aligned bullets, then a left-aligned numeric table spanning the lower body, with a thin rule and a footer row (Boeing logo left, date centred, page number right) at the bottom. Left margin about 8.5%, right margin about 8%.

**Visuals**

A data table of plain text rows with no fills or gridlines, Arial regular, right-aligned numeric columns. Header block row 1: 'Volume = 1920in3' at top left. Header row 2 columns: L (in), d (in), V (ft/sec), Angle, Vadj (in/sec), Flt Damage, damage (depth), Normal Energy, and an unlabelled comment column. Rows: 20/6/700/3.2 (bold)/69/0.50 (bold)/0.53/100%/STS-50 (estimated conditions); 20/6/770/3.2/116/ /0.75/121%/STS-50 plus 10% velocity; 20/6/700/5.2/361/ /1.60/264%/STS-50 plus 2 deg incidence angle; 20/6/600/3.2/2/ /0.05/73%/STS-50 threshold in quotes. A gap, then 20/6/720/10/1100/ /3.37/1024%/STS-107; 20/6/788/10/1243/ /3.66/1228%/STS-107 + 10% energy; 20/6/914/10/1505/ /4.16/1650%/STS-107 + 50% energy; 20/6/720/10/700/ /2.49/551%/STS-107 with V* = 800. Second block headers: V*, C, density (SOFI), density (tile), Strength (tile); values 400 (bold), 0.0195, 0.0014, 0.0052, 53, and 219912 at far right. Third block headers: Volume, V* (in/sec), Ratio, power, V* (ft/sec); rows 0.11/6500/1.0/3.5/542/test; 0.33/4500/0.8/ /375/test; 1.00/3200/0.8/ /267/test; 3.00/2500/1.0/ /208/test; 1920/400/1.0/ /33/flight. A thin grey outlined empty rectangle (no fill, about 0.1% stroke in #808080) sits over the V* column area to the right of the 400-level values, overlapping the table, with no content inside. Caption below the table: 'Volume vs V* (velocity to penetrate tile coating)'. The Boeing logo is a black italic wordmark with a stylised globe swoosh emblem, at bottom left.

**Design**

Background: Solid white #FFFFFF. White background #FFFFFF. Title and rules and table text are black #000000. Title is bold Arial/Helvetica sans-serif, about 5.6% of slide height per line, centred. Body bullets are Times New Roman regular serif, black #000000, about 3.6% of slide height. Table and captions are Arial regular sans-serif, about 1.7% of slide height, black. Footer date and page number are Times New Roman regular, black, about 2.3%. Rules are thin black lines about 0.2% of height. No corner radii, shadows or gradients.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- title at x 14, y 6.5, w 72, h 11 [Arial bold sans-serif; font size 5.6% of slide height; #000000; center aligned]: (Potentially) Similar STS-50 Impact Demonstrates / that Damage is Possible (Two lines, centred, line spacing about 6.5% of height)
- line at x 7.5, y 18.5, w 85, h 0.2 [#000000]: Full-width horizontal rule under title (Stroke black about 1pt)
- bullet list at x 8.5, y 21, w 84, h 18 [Times New Roman regular serif; font size 3.6% of slide height; #000000; left aligned]: • Damage to aft lower tile (0.5”d x 9”L x 4” W) on wing was found after STS-50 landing; / wheel well camera also observed missing ET bipod ramp insulation similar in size / • Small variation in energy input could substantially increase damage / • Incidence angle for STS-107 is predicted higher than STS-50 (Round bullet character, line spacing about 6.5% of height, paragraph gap between bullets)
- table at x 17, y 38, w 66, h 45 [Arial regular sans-serif; font size 1.7% of slide height; #000000; left aligned]: Volume = 1920in3 / Vadj / Flt / damage / Normal / L (in) d (in) V (ft/sec) Angle (in/sec) Damage (depth) Energy / 20 6 700 3.2 69 0.50 0.53 100% STS-50 (estimated conditions) / 20 6 770 3.2 116 0.75 121% STS-50 plus 10% velocity / 20 6 700 5.2 361 1.60 264% STS-50 plus 2 deg incidence angle / 20 6 600 3.2 2 0.05 73% STS-50 "threshold" / 20 6 720 10 1100 3.37 1024% STS-107 / 20 6 788 10 1243 3.66 1228% STS-107 + 10% energy / 20 6 914 10 1505 4.16 1650% STS-107 + 50% energy / 20 6 720 10 700 2.49 551% STS-107 with V* = 800 / V* C density (SOFI) density (tile) Strength (tile) / 400 0.0195 0.0014 0.0052 53 219912 / Volume V* (in/sec) Ratio power V* (ft/sec) / 0.11 6500 1.0 3.5 542 test / 0.33 4500 0.8 375 test / 1.00 3200 0.8 267 test / 3.00 2500 1.0 208 test / 1920 400 1.0 33 flight / Volume vs V* (velocity to penetrate tile coating) (Plain text table with no gridlines or fills; numeric columns right-aligned; 400 and 20/6/700/3.2/0.50 values in bold; comment column starts at about 64% x)
- shape at x 32.5, y 70.5, w 7, h 12 [#808080]: Thin empty grey outlined rectangle overlapping the table's V* column (No fill, stroke grey #808080 about 0.1% width, square corners, no shadow)
- line at x 11.5, y 85.3, w 77, h 0.2 [#000000]: Full-width footer rule above logo and footer row (Stroke black about 1pt)
- logo at x 11.5, y 86, w 11, h 3.5 [#000000]: Boeing logo: black italic BOEING wordmark with stylised globe swoosh emblem (Bottom left corner logo)
- footer at x 47, y 87, w 6, h 2 [Times New Roman regular serif; font size 2.2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 85.5, y 87, w 2, h 2 [Times New Roman regular serif; font size 2.4% of slide height; #000000; right aligned]: 7

### Slide 8

**Review notes**

- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.

**Text**

RCC Predicted Damage at Incidence Angles Greater / than 15 Degrees Based on Ice Database / Impactor / Damage / Angle / Velocity (fps) / Depth (in.) / 5 / 720 / 0.11 / 10 / 720 / 0.18 / 15 / 720 / 0.23 / 20 / 720 / 0.28 / 25 / 720 / 0.33 / Debris Size = 20” x 10” x 6” / Density = 2.4 lb/ft³ / 45° angle of wing was taken into account / Nominal panel thickness is 0.233 in. / RCC is clearly capable of withstanding impacts of at least 15 degrees; relative softness of SOFI (compared to ice) would indicate greater capability / • Maximum reported angle of 21 degrees is not an problem / •Looking at using Window ice and RTV data as an analog / 2/21/03 / 8

**Layout**

Single white slide with a centred two-line bold title at the top, a thin black horizontal rule beneath it spanning nearly the full width, a centred table in the upper-middle, two text notes below the table in two columns, a full-width boxed conclusion panel in the lower half, and a footer row with the Boeing logo at bottom left, the date centred and the page number at bottom right. Left margin of the table and notes is about 20% of slide width; the box spans about 9% to 90%.

**Visuals**

One table with a bold black outer border of about 3 px and thin black inner rules. Header row 1: a merged cell spanning columns 1-2 labelled 'Impactor' and a cell labelled 'Damage' in column 3. Header row 2: 'Angle' (column 1), 'Velocity (fps)' (column 2), 'Depth (in.)' (column 3). Data rows (Angle, Velocity fps, Damage depth in.): 5, 720, 0.11; 10, 720, 0.18; 15, 720, 0.23; 20, 720, 0.28; 25, 720, 0.33. Column widths are roughly equal, column 1 about 30%, column 2 about 35%, column 3 about 35% of table width. Plus one small Boeing logo at bottom left: the blue-grey swoosh mark with black italic bold capitals 'BOEING' in a grey-shaded style. No photographs or charts.

**Design**

Background: Solid white #FFFFFF. Plain white background (#FFFFFF). Title and table text black (#000000) in bold Arial/Helvetica sans-serif. Body notes and conclusion box text black (#000000) in Times New Roman serif regular. Accent: single black rule under title and black outline on conclusion box. No shadows, gradients or rounded corners. Title is about 4.6% of slide height per line, table text about 3.0%, body notes and box text about 3.0%, footer about 1.5%.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- shape at x 7.5, y 18.6, w 85, h 0.2 [#000000]: Thin horizontal rule under title (Black line about 1 px thick spanning from left margin to right margin.)
- title at x 12, y 7, w 76, h 10 [Arial, bold, regular case, no letter-spacing; font size 4.6% of slide height; #000000; center aligned]: RCC Predicted Damage at Incidence Angles Greater / than 15 Degrees Based on Ice Database (Two centred lines, line spacing about 1.1.)
- table at x 19.6, y 20.5, w 57, h 33 [#FFFFFF]: Table: Impactor (merged over Angle and Velocity) and Damage headers; rows 5/720/0.11, 10/720/0.18, 15/720/0.23, 20/720/0.28, 25/720/0.33 (White cell fill, black bold Arial text at about 3.0% of slide height, left-aligned in cells, outer border about 3 px black, inner rules about 1 px black, two header rows and five data rows.)
- body at x 19.9, y 56, w 27, h 3.5 [Times New Roman, regular; font size 3% of slide height; #000000; left aligned]: Debris Size = 20” x 10” x 6”
- body at x 19.9, y 61.5, w 17, h 3 [Times New Roman, regular; font size 3% of slide height; #000000; left aligned]: Density = 2.4 lb/ft³ (Superscript 3 after ft.)
- body at x 49.4, y 57, w 37.5, h 6.5 [Times New Roman, regular; font size 2.9% of slide height; #000000; left aligned]: 45° angle of wing was taken into account / Nominal panel thickness is 0.233 in. (Two lines, line spacing about 1.2.)
- shape at x 9, y 64.6, w 81, h 20.7 [#FFFFFF]: Rectangle outline enclosing conclusion text (No fill (white showing through), black stroke about 2 px, square corners, no shadow.)
- body at x 10, y 66, w 79, h 8 [Times New Roman, regular; font size 3.4% of slide height; #000000; left aligned]: RCC is clearly capable of withstanding impacts of at least 15 degrees; relative / softness of SOFI (compared to ice) would indicate greater capability (Two lines, line spacing about 1.2.)
- body at x 14.5, y 75.5, w 60, h 4.5 [Times New Roman, regular; font size 3.4% of slide height; #000000; left aligned]: • Maximum reported angle of 21 degrees is not an problem (Bullet character • indented about 5% of slide width from the box text margin.)
- body at x 19, y 81.5, w 52, h 3.5 [Times New Roman, regular; font size 2.9% of slide height; #000000; left aligned]: •Looking at using Window ice and RTV data as an analog (Bullet character • with no space after it, indented further than the bullet above.)
- logo at x 11.5, y 86.3, w 11, h 3.7 [#333333; left aligned]: Boeing logo: grey swoosh mark with black italic bold BOEING wordmark
- footer at x 47, y 87.3, w 5.3, h 2.2 [Times New Roman, regular; font size 1.6% of slide height; #000000; center aligned]: 2/21/03
- page number at x 86.8, y 87.3, w 1, h 2.2 [Times New Roman, regular; font size 1.6% of slide height; #000000; right aligned]: 8

### Slide 9

**Review notes**

- Worth studying: A plan view annotates predicted impact areas and numbered damage zones directly on the lower surface graphic, linking the analysis to the vehicle geometry.

**Text**

Thermal Analysis Assessment of Debris Impacted / Lower Surface in STS-107 Mission Locations / 1. Lower Access Panel one tile missing / 2. RCC Coating loss / Predicted Impact Area / 3. Main Landing Gear Door / one tile missing / 4. Lower Wing Area one tile missing / 5. Lower Wing Area damage area / 32 x 7.2 x 2.8 inch / 2/21/03 / 9

**Layout**

Title is centred at the top in two lines, with a thin black horizontal rule beneath it spanning nearly the full width. A large black-and-white technical illustration fills the central area, running from the left margin to the right margin below the rule. A thin rule sits above the footer, which holds the Boeing logo at left, the date centred and the slide number at right.

**Visuals**

Black-and-white line-art cross-section illustration of a Space Shuttle lower surface, drawn as a sloped wing-body surface on a white background, with a dense cross-hatched tile pattern. The left portion shows a flat, lower-left region with a row of small tiles along its top edge. The surface rises diagonally from lower-left to upper-right to the top edge of the illustration. A heavy black outline traces a rectangular region (main landing gear door) with a smaller inner rectangle outlined inside it. A large black arrow points from the 'Predicted Impact Area' box toward the lower-left corner of the gear door outline. A thin black arrow points from the label '1. Lower Access Panel' area to the sloped outline near the top of the gear door. A black arrow runs from the upper-right callout box down-left to a small grey dotted ellipse on the surface, marking the lower wing damage area. Dominant colours are black and white with grey hatching. The illustration is not cropped and is not boxed, and has no overlay or tint.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- title at x 18, y 7, w 64, h 12 [Times New Roman, regular; font size 5.2% of slide height; #000000; center aligned]: Thermal Analysis Assessment of Debris Impacted / Lower Surface in STS-107 Mission Locations (Two centred lines, line spacing about 1.2)
- line at x 7.5, y 18, w 85, h 0.2 [#000000]: Horizontal rule under the title (Stroke black, about 0.2 percent of slide height)
- illustration at x 7.5, y 21, w 85, h 57 [#000000]: Black-and-white cross-section of the Shuttle lower surface with sloped surface, tile hatching, gear door outline, damage ellipse and arrows (Not cropped, not boxed, white background showing through; hatched grey and black fill; no overlay)
- shape at x 9, y 53, w 26, h 8 [#FFFFFF]: Predicted Impact Area callout box (Rectangle with thin grey outline, white fill, no shadow, square corners)
- body at x 15, y 55, w 14, h 3 [Arial, bold, regular case; font size 2.2% of slide height; #000000; center aligned]: Predicted Impact Area (Single line)
- arrow at x 28, y 60, w 9, h 8 [#000000]: Large black arrow from Predicted Impact Area box to gear door corner (Thick black shaft with solid triangular head pointing down-right)
- shape at x 40, y 47, w 12, h 24 [#000000]: Rectangle outlining the main landing gear door with inner rectangle (Heavy black outline, square corners, no fill)
- arrow at x 41, y 42, w 6, h 8 [#000000]: Thin black arrow from the sloped surface near the gear door pointing down-left toward the surface (Thin black line with small solid arrowhead)
- body at x 25, y 34, w 26, h 7 [Times New Roman, regular; font size 2.6% of slide height; #000000; left aligned]: 1. Lower Access Panel one tile missing / 2. RCC Coating loss (Numbered list with tab gap after numbers, line spacing about 1.5)
- shape at x 59, y 57, w 9, h 4 [#A0A0A0]: Grey dotted ellipse marking lower wing damage area (Filled with fine grey stipple, thin black outline)
- arrow at x 62, y 34, w 10, h 24 [#000000]: Black arrow from callout box down-left to damage ellipse (Thin black line with solid arrowhead at lower end)
- shape at x 69, y 23, w 24, h 10 [#FFFFFF]: Callout box for items 4 and 5 (Rectangle with thin grey outline, white fill, square corners, no shadow)
- body at x 70, y 24, w 22, h 8 [Times New Roman, regular; font size 2.6% of slide height; #000000; left aligned]: 4. Lower Wing Area one tile missing / 5. Lower Wing Area damage area / 32 x 7.2 x 2.8 inch (Lines 1 and 2 left aligned, line 3 centred)
- body at x 44, y 65, w 19, h 8 [Times New Roman, regular; font size 2.6% of slide height; #000000; center aligned]: 3. Main Landing Gear Door / one tile missing (Inside white rectangular label box with thin grey outline, two centred lines)
- logo at x 11, y 92, w 10, h 3 [#000000]: Boeing logo, black italic wordmark with globe-like swoosh at left (Bottom-left corner logo)
- line at x 11, y 89, w 78, h 0.2 [#000000]: Thin horizontal rule above footer (Black stroke, thin)
- footer at x 47, y 91, w 6, h 3 [Times New Roman, regular; font size 2.6% of slide height; #000000; center aligned]: 2/21/03 (Date)
- page number at x 86, y 91, w 2, h 3 [Times New Roman, regular; font size 2.6% of slide height; #000000; right aligned]: 9 (Slide number)

### Slide 10

**Review notes**

- Review: Slide 7 is a raw spreadsheet paste with no emphasis, unlabeled columns and no statement of what to take from it, and slide 10 leaves results blank for cases 5 and 6, which are the ones the conclusion depends on.
- Suggested repair: Replace the broken images on slides 4 and 12, redraw slide 3 without the screenshot toolbar and empty box, and fill or explain the blank results cells on slide 10.

**Text**

Impacted Lower Surface Location Thermal Predictions
Case
Location
Assumptions
Results
1
Access Panel
(one tile missing)
Loss to last layer of TMM Densified layer
~ .2 inches
Temperature of Al Tube
Carrier 790 °F
No issue
2
RCC Panel 9 Lower Flange OML
(Coating Missing)
Coating loss and Carbon substrate
exposed
Substrate thickness: 0.193
inches
Loss .09 inches
No issue
3
Main Landing Gear Door
( one tile missing)
Loss to last 2 layers of TMM Densified
layer
~ .4 inches
Temperature of Structure
540 °F
No issue
4
Lower Wing Area
(one tile missing)
Loss to last 2 layers of TMM Densified
layer
~ .4 inches
Temperature below 350 °F
design req.
No issue
5
Lower Wing Area
(32 x 7.2 x 2.8 inch) Damage
Loss to last layers of TMM Densified
layer
~ .2 inches
6
Main Landing Gear Door
( several tiles Lost)
Loss to last layers of TMM Densified
layer
~ .2 inches
2/21/03
10

**Layout**

A single full-width table fills the content area below a title that is centred near the top of the slide, with a thin horizontal rule beneath the title spanning nearly the full width. A thin rule sits above the footer, which holds the Boeing logo at left, the date centred, and the slide number at right. The table has four columns (Case, Location, Assumptions, Results) and six body rows with a heavy outer border.

**Visuals**

Table with four columns: Case, Location, Assumptions, Results. Header row: Case; Location; Assumptions; Results. Row 1: Case 1; Location Access Panel (one tile missing); Assumptions Loss to last layer of TMM Densified layer ~ .2 inches; Results Temperature of Al Tube Carrier 790 °F, No issue. Row 2: Case 2; Location RCC Panel 9 Lower Flange OML (Coating Missing); Assumptions Coating loss and Carbon substrate exposed; Results Substrate thickness: 0.193 inches, Loss .09 inches, No issue. Row 3: Case 3; Location Main Landing Gear Door ( one tile missing); Assumptions Loss to last 2 layers of TMM Densified layer ~ .4 inches; Results Temperature of Structure 540 °F, No issue. Row 4: Case 4; Location Lower Wing Area (one tile missing); Assumptions Loss to last 2 layers of TMM Densified layer ~ .4 inches; Results Temperature below 350 °F design req., No issue. Row 5: Case 5; Location Lower Wing Area (32 x 7.2 x 2.8 inch) Damage; Assumptions Loss to last layers of TMM Densified layer ~ .2 inches; Results empty. Row 6: Case 6; Location Main Landing Gear Door ( several tiles Lost); Assumptions Loss to last layers of TMM Densified layer ~ .2 inches; Results empty. Boeing logo in the footer at bottom left, black italic bold wordmark with a stylised swoosh mark, grey-black.

**Design**

Background: Plain white #FFFFFF. White background. Title in a serif typeface similar to Times New Roman, regular weight, black #000000, about 4.5% of slide height. Table text in a bold sans-serif similar to Arial/Helvetica, black #000000; header labels about 3.8% of slide height, body text about 2.2% for location and assumptions, case numbers about 4% bold. Table borders black, heavy outer border about 0.6% of height, thin inner rules about 0.2%. Horizontal rules thin black. Footer date and page number in serif, black, about 2.5% of height. No shadows, gradients or rounded corners.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- line at x 7.5, y 17.5, w 85, h 0.2 [#000000]: Thin horizontal rule under title (Black stroke about 0.1% of height spanning from x 7.5% to 92.5%)
- title at x 18, y 7, w 66, h 7 [Times New Roman, regular, serif; font size 4.5% of slide height; #000000; center aligned]: Impacted Lower Surface Location Thermal Predictions
- table at x 13.5, y 19.5, w 73, h 61.5 [#FFFFFF]: Table with columns Case, Location, Assumptions, Results and six rows as listed in visuals (White cell fill, heavy black outer border about 0.6% of height, thin black inner rules; header row about 11% of table height)
- line at x 11, y 90.5, w 78, h 0.2 [#000000]: Thin horizontal rule above footer (Black stroke spanning from x 11% to 89%)
- logo at x 11.5, y 91.5, w 10, h 3 [#1A1A1A]: Boeing logo, black italic bold wordmark with swoosh mark (Bottom left of footer)
- footer at x 46, y 92.5, w 8, h 3 [Times New Roman, regular, serif; font size 2.5% of slide height; #000000; center aligned]: 2/21/03
- page number at x 85, y 92.5, w 4, h 3 [Times New Roman, regular, serif; font size 2.5% of slide height; #000000; right aligned]: 10

### Slide 11

**Review notes**

- Worth keeping: The assertion-style titles on slides 3, 5, 6, 8 and 11, the simple order-of-analysis opener on slide 2, and the clear angle/depth table on slide 8.
- What would change the score: Turn the slide 7 spreadsheet into a labeled comparison with the key STS-50 versus STS-107 numbers highlighted, and cut slides 6, 11 and 13 to a few lead statements with the unresolved multi-tile case stated plainly.

**Text**

Structural Assessment Provides for Intact / Contingency Landing with Damaged Tiles
Criteria for M/OD study were to assess on-orbit risk that / cannot be controlled
Study allowed for significant degradation beyond design / criteria
Structural temperatures well beyond 350F design (due / to loss of tile)
Repair of structure required
Small holes in structure, allowing internal plasma flow, / were permissible if not in critical area
Not expected for STS-107
Factor of Safety not maintained for design conditions
Critical subsystems were included in evaluation
Wing has few subsytems except in landing gear box and / elevon cove
Wing spars are considered critical structures
Conditions identified to ensure intact contingency landing
2/21/03
11

**Layout**

Single-column bulleted body text on a white slide, with a centred two-line bold title at the top, a thin black horizontal rule beneath the title spanning nearly the full width, and a second thin rule above the footer. The footer row holds the Boeing logo at the left, a centred date and the slide number at the right, with margins of roughly 6 to 11 percent at the sides.

**Visuals**

One Boeing logo at bottom left: a stylised swoosh-like globe mark followed by the bold italic wordmark BOEING in black and grey gradient tones. No photographs, charts or other graphics.

**Design**

Background: Solid white #FFFFFF. White background with black text throughout. Title is bold sans-serif (Arial Bold style), black #000000, about 4.5 percent of slide height per line. Body text is bold sans-serif in black #000000, first-level bullets about 3.6 percent of slide height, second-level about 3.3 percent, third-level about 2.6 percent. Footer date and page number are in a regular serif (Times New Roman style) about 2.2 percent of slide height. Rules are thin black lines about 0.2 percent of height, with no shadows, radii or gradients.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- shape at x 0, y 0, w 100, h 100 [#FFFFFF]: Background fill, white page (Full slide, no border)
- title at x 19, y 6.5, w 62, h 11 [Arial, bold, regular case; font size 4.5% of slide height; #000000; center aligned]: Structural Assessment Provides for Intact / Contingency Landing with Damaged Tiles
- line at x 7.5, y 18.3, w 85, h 0.2 [#000000]: Horizontal rule under title (Thin black stroke, about 0.2 percent of slide height)
- bullet list at x 12, y 21, w 80, h 60 [Arial, bold, regular case; font size 3.6% of slide height; #000000; left aligned]: Criteria for M/OD study were to assess on-orbit risk that / cannot be controlled / Study allowed for significant degradation beyond design / criteria / Structural temperatures well beyond 350F design (due / to loss of tile) / Repair of structure required / Small holes in structure, allowing internal plasma flow, / were permissible if not in critical area / Not expected for STS-107 / Factor of Safety not maintained for design conditions / Critical subsystems were included in evaluation / Wing has few subsytems except in landing gear box and / elevon cove / Wing spars are considered critical structures / Conditions identified to ensure intact contingency landing (Level 1 bullets are solid black circles, level 2 are en dashes, level 3 are small black diamonds. Line spacing about 1.2. Level 2 text about 3.3 percent, level 3 about 2.6 percent of slide height.)
- line at x 11.3, y 88.3, w 77.7, h 0.2 [#000000]: Horizontal rule above footer (Thin black stroke, about 0.2 percent of slide height)
- logo at x 11.5, y 91, w 10, h 3.5 [#333333]: Boeing logo: swoosh globe mark with bold italic BOEING wordmark (Bottom left corner, grey and black tones)
- footer at x 47, y 91, w 6, h 3 [Times New Roman, regular, serif; font size 2.2% of slide height; #000000; center aligned]: 2/21/03
- page number at x 85.5, y 91, w 3.5, h 3 [Times New Roman, regular, serif; font size 2.2% of slide height; #000000; right aligned]: 11

### Slide 12

**Review notes**

- Suggested repair: Replace the broken images on slides 4 and 12, redraw slide 3 without the screenshot toolbar and empty box, and fill or explain the blank results cells on slide 10.

**Text**

2/21/03 / 12

**Layout**

Blank slide with no title or body placeholder. A thin full-width black rule sits near the top at about 18.6% of slide height, and the X graphic is centred horizontally and vertically in the upper-middle area. A second thin rule sits above a footer band at about 85% of slide height, with the Boeing logo at bottom left, the date centred in the footer, and the slide number at bottom right. Side margins are about 7.5% and the footer rule runs from about 11.4% to 88.6% of slide width.

**Visuals**

One large bold X shape, centred on the slide. It is formed of two straight, equal-width diagonal bars that cross at their midpoints, with square-cut (flat-ended, horizontal) terminals at the four ends. The X spans roughly 32% to 69% of slide width and 35% to 72% of slide height. Its fill is dark charcoal #3A3A3A with no outline, shadow or gradient. Logo: the Boeing company logo at bottom left, a stylised globe-with-swoosh mark followed by the word BOEING in bold italic black capitals with a grey shadow effect.

**Design**

Background: Solid white #FFFFFF. Plain white background with no texture. Black #000000 horizontal rules of about 1 pt weight; the top rule spans about 7.5% to 92.5% of slide width and the footer rule spans about 11.4% to 88.6%. No title text. Footer text (date and page number) is black #000000 in a Times New Roman-style serif, regular weight, at roughly 2.6% of slide height. The X is the only large graphic element, dark grey #3A3A3A, with square terminals and no rounded corners.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- line at x 7.5, y 18.6, w 85, h 0.3 [#000000]: Top horizontal rule spanning most of the slide width (Solid black line, about 1 pt, straight, no shadow.)
- shape at x 32.2, y 35.1, w 37.1, h 37.2 [#3A3A3A]: Large X formed by two crossing diagonal bars with flat horizontal ends (Two equal-width straight bars crossing at centre, flat-cut terminals, no outline, no shadow, opacity 100%.)
- line at x 11.4, y 85.3, w 77.6, h 0.2 [#000000]: Footer horizontal rule (Solid black line, about 1 pt, straight.)
- logo at x 11.5, y 86.4, w 11.1, h 3.6 [#000000]: Boeing logo: globe-and-swoosh mark with the word BOEING in bold italic capitals (Greyscale logo with soft grey shading on the lettering.)
- footer at x 47.1, y 87.4, w 5.3, h 2 [Times New Roman, regular; font size 2.6% of slide height; #000000; center aligned]: 2/21/03 (Centred in the footer band, aligned on the same baseline as the page number.)
- page number at x 86, y 87.4, w 1.7, h 2 [Times New Roman, regular; font size 2.6% of slide height; #000000; right aligned]: 12 (Bottom-right of the footer band.)

### Slide 13

**Review notes**

- What would change the score: Turn the slide 7 spreadsheet into a labeled comparison with the key STS-50 versus STS-107 numbers highlighted, and cut slides 6, 11 and 13 to a few lead statements with the unresolved multi-tile case stated plainly.

**Text**

Summary and Conclusion
Impact analysis (“Crater”) indicates potential for large TPS damage
Review of test data shows wide variation in impact response
RCC damage limited to coating based on soft SOFI
Thermal analysis of wing with missing tile is in work
Single tile missing shows local structural damage is possible, but no burn through
Multiple tile missing analysis is on-going
M/OD criteria used to assess structural impacts of tile loss
Allows significant temperature exceedance, even some burn through
Impact to vehicle turnaround possible, but maintains safe return capability
Conclusion
Contingent on multiple tile loss thermal analysis showing no violation of M/OD criteria, safe return indicated even with significant tile damage
2/21/03
13

**Layout**

Single-column layout on a white slide with a centred title at the top, a full-width horizontal rule beneath it, and a bulleted body block left-aligned with a hanging indent. A thin footer rule sits near the bottom, with the Boeing logo at bottom left, the date centred and the slide number at bottom right.

**Visuals**

The slide has no photographs, charts or diagrams. The only non-text visual is the Boeing logo at bottom left: a stylised swoosh emblem beside the black italic wordmark BOEING in grey-black tones.

**Design**

Background: Solid white #FFFFFF. Plain white background with black text only. Titles and body are bold Arial-style sans-serif. The title is about 3.9% of slide height and the body about 2.6%, with sub-bullets slightly smaller. Bullets are solid black dots at level 1, en dashes at level 2 and small black diamonds at level 3. The rules are thin black lines about 0.2% of slide height. There are no shadows, gradients or rounded corners.

**Elements and positions** (back to front; x, y, width, height as % of the slide; type, colour and alignment in brackets)

- title at x 31, y 9.5, w 38, h 6 [Arial, bold, regular case; font size 3.9% of slide height; #000000; center aligned]: Summary and Conclusion (Centred on the slide, sits above the horizontal rule.)
- line at x 7.5, y 18.4, w 85, h 0.3 [#000000]: Horizontal rule under the title (Thin black line about 0.2% of slide height, spanning most of the slide width.)
- bullet list at x 12.5, y 20.2, w 76, h 48.5 [Arial, bold, regular case; font size 2.6% of slide height; #000000; left aligned]: ● Impact analysis (“Crater”) indicates potential for large TPS damage / – Review of test data shows wide variation in impact response / – RCC damage limited to coating based on soft SOFI / ● Thermal analysis of wing with missing tile is in work / – Single tile missing shows local structural damage is possible, but no burn through / – Multiple tile missing analysis is on-going / ● M/OD criteria used to assess structural impacts of tile loss / – Allows significant temperature exceedance, even some burn through / ◆ Impact to vehicle turnaround possible, but maintains safe return capability (Level 1 solid black dots, level 2 en dashes, level 3 small diamonds. Hanging indents. Line spacing about 1.1, with extra space before each level-1 item.)
- body at x 12.3, y 68.5, w 14, h 3.5 [Arial, bold, underlined, regular case; font size 2.9% of slide height; #000000; left aligned]: Conclusion (Underlined with a black rule under the word.)
- bullet list at x 12.5, y 72.5, w 76, h 12.5 [Arial, bold, regular case; font size 2.6% of slide height; #000000; left aligned]: ● Contingent on multiple tile loss thermal analysis showing / no violation of M/OD criteria, safe return indicated even with / significant tile damage (Level 1 solid black dot with hanging indent, line spacing about 1.1.)
- line at x 14.7, y 85.3, w 74, h 0.3 [#000000]: Footer rule (Thin black line above the footer.)
- logo at x 11.6, y 86.4, w 11, h 3.6 [#2B2B2B]: Boeing logo: swoosh emblem with black italic BOEING wordmark (Corner logo at bottom left.)
- footer at x 47.1, y 87.8, w 5.3, h 2 [Times New Roman, regular; font size 1.9% of slide height; #000000; center aligned]: 2/21/03 (Date centred in the footer area.)
- page number at x 86, y 87.8, w 1.8, h 2 [Times New Roman, regular; font size 1.9% of slide height; #000000; right aligned]: 13 (Slide number at bottom right.)
